Huge Refoam Kit Sale - while supplies last. One PAIR refoam kits $15-$20.00 (depending on size and brand). Specialty foams $30.00 per PAIR and up. Coupons may not be applied to refoam kits.

Add appropriate flat freight shipping to the shopping cart. See buttons on right... US 48 States Freight -- Canada Freight -- International Freight. Some refoam kits will have a special oversize handling fee. If you have any questions about shipping contact us.

Prices valid for internet sales only! When ordering - list brand and model speaker and measure original dustcap - see C in diagram. Add this info (if you have) in the notes section of the shopping cart. Click on Add Notes

WE'VE SOLVED THE ADHESIVE PROBLEM!! It did not happen often, but occasionally there were problems with the contact glue that we were bottling for refoam kits. We found that if not used in a timely fashion or if exposed to high temperatures (like those found in a delivery truck) there was a reaction between the plastic bottle and solvent. We are now sending 1 oz bottles of DAP Contact glue that comes with its own applicator so the problem is solved, BUT do not spread on both surfaces as listed in the instructions. Do not apply adhesive to the foam. We appreciate your patience and suggestions as we worked towards this solution OUR CUSTOMERS ARE THE BEST! The Speaker Exchange

Refoam Kits
All prices shown is for TWO PolyEther Refoam Kits ( a PAIR for TWO speakers ). SINGLE FOAM KITS AVAILABLE. PLEASE CALL TO ORDER.

	Measure your speaker before scrolling down for sizes. Some speakers have an extra large outside frame that will throw off your measurements. You need to measure the inside and outside diameter of the original foam. You will need to remove the gaskets (if there is one) to do so. Determine the size of the foam you need. When evaluating, remember, the inside edge of the foam will overlap the outside edge of the cone by approximately 1/4" (0.250) Do not remove the original dustcap on Infinity Bullet or Bose 802 or 901 woofers; center by eye, ear and feel.
HOW TO MEASURE:	A: OD (outside diameter) outside edge to outside edge of speaker frame. In this example the OD is 6.5". BUT, the most important info is the OD of the original foam. In this case, the OD of the original foam (under the gasket) is approx 6.0".
	B: ID (inside diameter) of gaskets or OD of original foam surround (where the foam surround edge begins on the outside speaker frame - under the gaskets). Here the ID is 5.5". outside speaker frame). Here the ID is 5.5" Your foam will extend beyond the inside edge of the gaskets, so the OD of the foam should be a mimimum of 5.75".
	C: ID of Original Foam. Here the measurement is 4.5". Remember, you need 1/4" overlap for the foam to attach to the cone so if your C is 4.5" then the body of your cone OD should be 4.25".
	D: OD of Original Dustcap. Here you see the measurement is 1.75" - What material? = screen. HOW TO MEASURE: This speaker would use the RFK6 Angle.
	Note: If your speaker has a larger flange as this Infinity speaker does, we do not need to know that the measurement for "A" is 8.75". We would still consider this an 8" speaker. The "B" dimension is that the foam OD is 7.75". That is the important info. "C" is 5" and "D" is 2" screen. This speaker would use the RFK8 Angle.

ID: Inside Diameter

OD: Outside Diameter

Metric conversion to millimeters multiply by 25.4

Refoaming Instructions >>Refoaming FAQ's >>Need Gaskets >>Need Dust Caps >>

Do you need a smaller foam than shown here? >>

Add appropriate freight charge below. In most cases, Infinity refoams require the angle kit. Add appropriate freight charge below. In most cases, Infinity refoams require the angle kit. Add appropriate freight charge below. In most cases, Infinity refoams require the angle kit. Add appropriate freight charge below. In most cases, Infinity refoams require the angle kit. Add appropriate freight charge below. In most cases, Infinity refoams require the angle kit. Add appropriate freight charge below. In most cases, Infinity refoams require the angle kit. Add appropriate freight charge below.

	3.25" Refoam Kit Price: $15.00 / Pair Code: RFK3.25 Desc: 3.25" Refoam Kit - ID: 2.230 (56.64mm) - OD: 3.250 (82.55mm) two foams, two dustcaps, centering shims, glue, instructions
	3.875" Refoam Kit Flat Price: $15.00 / Pair Code: RFK3.875 Flat Desc: 3.875" Refoam Kit - ID: 2.625 (66.675mm) - OD: 3.875 (98.425mm) two foams, two dustcaps, centering shims, glue, instructions
	4" Bose (NOT JUST FOR BOSE BRAND) Refoam Kit Price: $15.00 / Pair Code: RFK4.5 Desc: Bose 4" Refoam Kit M-Roll - ID: 2.875 (73.025mm) - OD: 4.280 (108.712mm) two foams, two dustcaps, centering shims, glue, instructions
	Bose 802 or 901 Refoam Kits Quantity of 20 - Enough foams for two cabinets plus 2-4 spares (2 spares for 901 and 4 spares for 802) Price: $40.00 Code: RFK901 Desc: Bose 4" Refoam Kit m-roll - ID:2.875" (73.025mm) - OD:4.280" (108.712mm) - Fits 801, 802 and 901
	5" Refoam Kit Angle Price: $15.00 / Pair Code: RFK5 Desc: 5" Refoam Kit - ID: 3.2" (81.28mm) - OD: 4.75" (120.65mm) two foams, two dustcaps, centering shims, glue, instructions Temporarily Out of Stock
	5.25" Refoam Kit Angle Price: $15.00 / Pair Code: RFK5.25 Angle Desc: 5.25" Refoam Kit Angle Attach - ID: 3.510" (89.154mm) - OD: 5.100" (129.540mm) two foams, two dustcaps, centering shims, glue, instructions
	5x7" Refoam Kit Price: $15.00 / Pair Code: RFK5x7 Desc: 5x7" Refoam Kit - ID: 3.438" (28.84mm) x 5.625" (142.88mm) - OD 5.375" (136.53mm) x 7.388" (195.28mm) two foams, two dustcaps, centering shims, glue, instructions
	6" Refoam Kit Angle Price: $15.00 / Pair Code: RFK6 Angle Desc: 6" Refoam Kit Angle Attach - ID: 4.200" (106.68mm) - OD: 5.950" (151.13mm) two foams, two dustcaps, centering shims, glue, instructions
	6" Refoam Kit Angle Smaller ID Price: $15.00 / Pair Code: RFK6 Angle SM Desc: 6" Refoam Kit Angle Attach - ID: 4.00" (101.60mm) - OD: 6.0" (152.40mm) two foams, two dustcaps, centering shims, glue, instructions
	6x9" Refoam Kit Angle Price: $15.00 / Pair Code: RFK6x9 Desc: 6x9" Refoam Kit Angle Attach - ID: 7.125 x 4.500 - OD: 8.750 x 6.125 (ID: 180.975 x 114.300, OD: 222.250 x 155.575 mm) two foams, two dustcaps, centering shims, glue, instructions
	8" Refoam Kit Angle Price: $15.00 / Pair Code: RFK8 Angle Desc: 8" Refoam Kit Angle Attach - ID: 5.500" (139.700mm) - OD: 7.750" (196.850mm) two foams, two dustcaps, centering shims, glue, instructions
	8" Refoam Kit Flat Price: $15.00 / Pair Code: RFK8 Flat Desc: 8" Refoam Kit Flat Attach - ID: 5.375" (136.525mm) - OD: 7.312" (185.725mm) two foams, two dustcaps, centering shims, glue, instructions
	8" Refoam Kit JBL116 Price: $15.00 / Pair Code: RFKL8 JBL116 Desc: 8" Refoam Kit JBL116 - ID: 5.25" (133.35mm), OD: 7.75" (196.85mm) two foams, two dustcaps, centering shims, glue, instructions
	8" Refoam Kit JBL LE8 Price: $15.00 / Pair Code: RFKLE8 Desc: 8" Refoam Kit JBL LE8 - ID: 5.188" (131.775mm), OD: 6.625" (168.275mm)
	8" Resurround Kit Dynaudio Butyl Rubber Price: $90.00 / Pair Code: RFK8Dyna Desc: 8" Resurround Kit Dynaudio Butyl Rubber - ID: 5.625" (142.875mm), OD: 7.938" (201.625mm) two foams, two dustcaps, centering shims, glue, instructions
	8" Refoam Kit Red Flatish-Angle Price: $15.00 / Pair Code: RFK8 Red Desc: 8" Red Refoam Kit Flatish-Angle Attach - ID: 5.375" (136.525mm) - OD: 7.75" (196.85mm) two foams, two dustcaps, centering shims, glue, instructions
	10" Refoam Kit BAZOOKA Price: $30.00 / Pair Code: RFK10 BAZOOK Desc: 10" Refoam Kit Bazooka - ID: 6.375" (161.925mm), OD: 9.875" (250.825mm) two foams, two dustcaps, centering shims, glue, instructions
	10" Refoam Kit Angle Price: $20.00 / Pair Code: RFK10 Angle Desc: 10" Refoam Kit Angle Attach - ID: 7.125" (180.975mm) - OD: 9.750" (247.650mm) two foams, two dustcaps, centering shims, glue, instructions
	10" Refoam Kit Flat Price: $20.00 / Pair Code: RFK10 Flat Desc: 10" Refoam Kit Flat Attach - ID: 7.238" (183.845mm) - OD: 9.618" (244.297mm) two foams, two dustcaps, centering shims, glue, instructions
	10" Refoam Kit Red Angle Attach Cerwin Vega Style Price: $20.00 / Pair Code: RFK10 Red Desc: 10" Refoam Kit Red Angle Attach Cerwin Vega Style - ID: 7.063" (179.40mm), OD: 9.562" (242.875mm) two foams, two dustcaps, centering shims, glue, instructions
	10" Refoam Kit Angle Infinity w/Bullet DC Price: $30.00 / Pair Code: RFK10 Infin bullet Desc: 10" Refoam Kit Angle Attach for Infinity with a Bullet Dust Cap only - ID: 6.813" (173.050mm), OD: 9.625" (244.475mm), two foams, centering shims, glue, instructions - DO NOT REMOVE ORIG DUSTCAP- must center by eye, ear and feel
	10" Refoam Kit JBL 125 Price: $20.00 / Pair Code: RFK10 JBL125 Desc: 10" Refoam Kit JBL 125, 127 - ID: 6.75" (171.45mm), OD: 9.375" (238.125mm) two foams, two dustcaps, centering shims, glue, instructions
	10" Refoam Kit JBL LE10 Price: $30.00 / Pair Code: RFKLE10 Desc: 10" Refoam Kit JBL LE10 - ID: 7.125" (180.975mm), OD: 8.68" (220.650mm) two foams, two dustcaps, centering shims, glue, instructions
	10" Refoam Kit Flat JL Audio Style Price: $20.00 / Pair Code: RFK10JL Flat Desc: 10" Refoam Kit Flat JL Audio Style - ID: 7.0" (177.800mm) - OD: 9.5" (241.300mm) two foams, two dustcaps, centering shims, glue, instructions
	10" Refoam Kit Rockford Fosgate Price: $30.00 / Pair Code: RFK10 RF Desc: 10" Refoam Kit Rockford Fosgate - ID: 6.50" (165.10mm), OD: 9.75" (247.65mm) two foams, two dustcaps, centering shims, glue, instructions
	11" Refoam Kit AR 3, 3a, 12 Price: $20.00 / Pair Code: RFK11 Desc: 11" AR Refoam Kit - ID: 8.00" (203.200mm) - OD: 10.375" (263.525mm) two foams, two dustcaps, centering shims, glue, instructions
	11" DYNAUDIO Price: $30.00 / Pair Code: RFK11 Dynaud Desc: 11" DYNAUDIO Refoam Kit - ID: 7.87" (200.00mm) - OD: 10.23" (260.00mm) two foams, two dustcaps, centering shims, glue, instructions
	12" Advent w/ Flange 10" Cone Refoam Kit (different from masonite ring) Also for Dahlquist DQ-10 woofers Price: $20.00 / Pair Code: RFK ADV12 FLN Desc: 12" Advent w/ Flange 10" Cone Refoam Kit - ID: 7.125" (182mm) - OD: 9.375" (235mm) two foams, two dustcaps, centering shims, glue, instructions
	12" Refoam Kit Angle Attach Price: $20.00 / Pair Code: RFK12 Angle Desc: 12" Refoam Kit Angle Attach - ID: 9.00" (228.600mm) - OD: 11.700" (297.180mm) two foams, two dustcaps, centering shims, glue, instructions
	12" Refoam Kit Flat Attach Price: $20.00 / Pair Code: RFK12 Flat Desc: 12" Refoam Kit Flat Attach - ID: 9.00" (228.600mm) - OD: 11.750" (298.450mm) two foams, two dustcaps, centering shims, glue, instructions
	12" Resurround Kit Dynaudio Butyl Rubber Price: $90.00 / Pair Code: RFK12Dyna Desc: 12" Resurround Kit Dynaudio Butyl Rubber - ID: 7.75" (196.850mm), OD: 10.125" (257.175mm) two butyl surrounds, two dustcaps, centering shims, glue, instructions
	12" Refoam Kit Red Angle Attach Cerwin Vega Style Price: $30.00 / Pair Code: RFK12 Red Desc: 12" Refoam Kit Red Angle Attach Cerwin Vega Style - ID: 8.75" (222.25mm), OD: 11.50" (292.100mm) two foams, two dustcaps, centering shims, glue, instructions
	12" Refoam Kit JBL 128 Price: $30.00 / Pair Code: RFK128 Desc: 12" Refoam Kit JBL 128 - ID: 9.062" (230.175mm), OD: 11.437" (290.50mm) two foams, two dustcaps, centering shims, glue, instructions
	12" Refoam Kit Flat JL Audio Style Price: $20.00 / Pair Code: RFK12JL Flat Desc: 12" Refoam Kit Flat Attach JL Audio Style - ID: 8.75" (222.250mm) - OD: 11.562" (293.675mm) two foams, two dustcaps, centering shims, glue, instructions
	12" Refoam Kit Rockford Fosgate Price: $30.00 / Pair Code: RFK12 RF Desc: 12" Refoam Kit Rockford Fosgate Style - ID: 8.25" (209.55mm), OD: 11.75" (298.45mm) Check your measurements. DOES NOT FIT ALL Rockfords. - two foams, two dustcaps, centering shims, glue, instructions
	12" Refoam Kit Tannoy Price: $75.00 / Pair Code: RFK12 Tannoy Desc: 12" Refoam Kit - ID: 8.75" (222.250mm) - OD: 11.625" (295.275mm) two foams, two dustcaps, centering shims, glue, instructions
	12" Refoam Kit JBL 2214 Price: $20.00 / Pair Code: RFK12 JBL2214 Desc: 12" Refoam Kit JBL 2214 - ID: 9.0" (228.60mm), OD: 11.50" (292.10mm) two foams, two dustcaps, centering shims, glue, instructions
	14" Refoam Kit JBL LE14 Price: $30.00 / Pair Code: RFKLE14 Desc: 14" Refoam Kit JBL LE14 - ID: 10.625" (269.875mm), OD: 12.187" (309.550mm) two foams, two dustcaps, centering shims, glue, instructions
	15" Refoam Kit Angle Attach Price: $20.00 / Pair Code: RFK15 Angle Desc: 15" Refoam Kit Angle Attach - ID: 11.31" (294.45mm) - OD: 14.50" (368.30mm) two foams, two dustcaps, centering shims, glue, instructions
	15" Refoam Kit Angle Attach Price: $30.00 / Pair -- for Radio Shack Mach 2 Code: RFK15 LG Angle Desc: 15" Refoam Kit Angle Attach - ID: 11.625" (295.275mm) - OD: 14.625" (341.475mm) two foams, two dustcaps, centering shims, glue, instructions
	15" Refoam Kit Flat Attach Price: $20.00 / Pair Code: RFK15 Flat Desc: 15" Refoam Kit Flat Attach - ID: 11.750" (298.45mm) - OD: 14.500" (368.300mm) two foams, two dustcaps, centering shims, glue, instructions
	15" Refoam Kit Red Flat Attach Cerwin Vega Style Price: $30.00 / Pair Code: RFK15 Red Desc: 15" Refoam Kit Red Flat Attach Cerwin Vega Style - ID: 11.875" (301.625mm), OD: 14.50" (368.300mm) two foams, two dustcaps, centering shims, glue, instructions
	15" Refoam Kit JBL 2235 Price: $30.00 / Pair Code: RFK2235 Also works with PIONEER HPM1100, HPM150/HPM1500 Desc: 15" Refoam Kit JBL 2235 - ID: 12.062" (306.375mm), OD: 14.437" (366.700mm) two foams, two dustcaps, centering shims, glue, instructions
	15" Radio Shack Realistic Mach 1 Refoam Kit-Angle Price: $35.00 / Pair Code: RFK15 MAch Desc: 15" Refoam Kit Radio Shack Mach 1 - ID: 10.75 (273.050mm), OD: 14.50" (368.30mm) two foams, two dustcaps, centering shims, glue, instructions
	15" Refoam Kit Tannoy Price: $75.00 / Pair Code: RFK15 Tannoy Desc: 15" Refoam Kit Tannoy - ID: 10.812 (274.625mm), OD: 14.250" (361.950mm) two foams, two dustcaps, centering shims, glue, instructions
	18" Refoam Kit JBL 2245 Price: $40.00 / Pair Code: RFK2245 Desc: 18" Refoam Kit JBL 2245 - ID: 14.75" (374.650mm), OD: 16.937" (430.200mm) two foams, two dustcaps, centering shims, glue, instructions
	Gaskets 8" Price: $3.00 One piece cardboard-chip 8" round gasket.
	Gaskets 10" Price: $3.00 Set of 4 cardboard-chip 10" gaskets.
	Gaskets 12" Price: $3.00 Set of 4 cardboard-chip 12" gaskets.
	Gaskets 12" Rubitex Price: $4.00 Set of 4 Rubitex (rubber top, chip bottom) 12" gaskets.
	Gaskets 15" Price: $4.00 Set of 4 cardboard-chip 15" gaskets.
	Gaskets 15" Rubitex Price: $5.00 Set of 4 Rubitex (rubber top, chip bottom) 15" gaskets.
	Gaskets 15" JBL Foam Price: $6.00 Set of 4 foam 15" gaskets.
	Gaskets 18" Price: $6.00 Set of 4 cardboard-chip 18" gaskets.
	Gaskets 18" Rubitex Price: $6.00 Set of 4 Rubitex (rubber top, chip bottom) 18" gaskets.